36L Flexi 3V: Produces 23L to 26L of finish wort
Double batching simplified and a whole lot faster:
Specifically designed for double batching this 3 vessel system can be used as a 2 vessel system or as a 3 vessel system. When doing your first batch use the system as a 3v and this is as easy as heating the water in the provided Hot Liquor Tank (HLT), transfering it into the proveded Mash Tun and then adding grains and mash. Once the mashing period is complete transfer the fluid from the Mash Tun to the provided Boiler Kettle, at the same time you transfer further water from the HLT to the top of the Mash Tun (sparg). In completing the above you have freed up your Mash Tun to start the process again.
When doing the second batch simply use the system as a 2 vessel system. Heat water in the HLT then transfer required water to the Mash Tun and add grain to be mashed. Once mashing is complete simply raise the supplied Mesh Basket and sit it on the RIM of the vessel to drain as you add further water from the HLT to rinse over the grain in the basket (sparg). Once sparging is complete bring to the boil and complete boiling process.
What You Get:
- 3 X 36L NANO Brewery 304SS Triple Base Vessel with Welded 2″ Triclamp Port
- 1 X 36L Vessel Suited 304SS 300 Micron Mesh Basket
- 3 X 304SS 2200w Element with 2″ Tri Clamp Kits (10 amp elements, 30 amp in total)
- 2 X 304SS 100mm Thermowells
- 2 X Temperatur Controllers
- 1 X 65mm 3″ 304SS NANO Brewery 304SS Dial Thermometer
- 5 X 304SS Kettle Plugs
- 3 X QuickSeal 304SS 3 Piece Ball Valve sets
- 3 X 1/2″ 304SS Barb Fittings Choose Optional Extra’s
Choose Your Optional Extra’s:
With this system we have made the Pumps, Wort Chillers and Silicon Hosing seperate as a number of brewers might have some items already.
PUMPS: If you want one pump then the system (when using as a 3 vessel system) will need to go on two levels. The HLT will need to go above the Mash Tun to gravity feed water in order to complete the sparging function whilst transfering wort from the Mash Tun to the Boiler Kettle. 2 Pumps will allow all kettles on the same level when using the system as a 3 vessel system.
If you would like Camlocks or Quick Disconnects with the system then please contact us direct through the store to make changes and the purchase.
Please Note: Mash temperature is maintained through use of the 2200w element which is supplied within the Mash Tun. All kettles have a 2200w element within them. The 2 supplied Temperature Controllers controll the elements with the HLT and the Mash Tun.