All Brew Kettles now come with free upgrade to Quick Seal 3 piece ball valve set except our 36L vessels
We are happy to pre drill holes into your Brew Kettle purchased for free.
- 34mm for element holes
- 22mm for any half inch fittings we offer
AT Cheeky Peak Brewery we offer quality 304SS vessels that match any supplier and include features that not many suppliers offer. The price of our vessels are also extremely competitive considering the features on offer.
Each of our new NANO Brewery 304SS Brew Kettles are branded and come standard with 3 X 22.5 mm holes pre drilled. In the bottom hole we put in a 304SS full bore 3 Piece Ball Valve weld less kit (Happy to change to a 2 Piece Ball Valve upon request). The 3 Piece Ball Valve kit includes a 1/2" barb to attach silicon hose to the outlet of the Ball Valve and our new adaptor which allows a BSPP 1/2" threaded male fitting to be fitted into the inside of the vessel, basically you can fit a Pick Up Tube, Street Elbow, 1/2" Barb, or Bazooka Screen to the inside of the pot and no other fittings are required. In the hole above the dump valve we put in a 1/2" 304SS Kettle Plug kit which can be removed for a Thermowell or 3" Dial Thermometer. Additionally, in the 3rd hole at the top of the vessel, we put in another 1/2" 304SS Kettle Plug kit which can be removed for a Sparge Arm or so the brewer can put there silicon hose through to hold it in place whilst he recirculates wort whilst Mashing. All weld less fittings are fitted to vessel leak free with food grade, high temp Silicon O-rings (not rubber that melts to the vessel) so no Teflon tap is required.
We offer our Brew Kettles in single or triple base. Single base means the bottom of the pot is simply 1mm or 1.2mm thick 304SS (depending on thickness of the SS vessels construction) and a triple base means that the bottom of the pot has two layers of stainless steel with a thin layer of aluminium between the stainless steel. The aluminium layer conducts, retains and spreads heat across the bottom of the vessel, improving heating efficiency and helping to avoid boil overs.
All our NANO Brewery 304SS Brew Kettles come with electronically etched volume markings internally and silicon grips over the SS handles on the vessel and the lid. All our Brew Kettles can be custom fitted and we are happy to add further holes or parts to them to suit your brewery needs.