SonFlow 26 Plate Gasketed Wort Chiller
The SonFlow 26 plate gasketed heat exchanger cools wort to pitching temperature as it is pumped from the from our 230L Double Tip 3V Brewery. The SonFlow is a commercial chiller and the most effeciant wort chillers Cheeky Peak Brewery offer.
The SonFlow chillers can be ordered either with or without a mounting frame. This is the model that comes with feet so the chiller can stand up straight. The SonFlow chiller can also be DIY mounted to our NANO Brewery frames as there is plenty of space to place the chiller.
It can use any cold water for chilling – either cool tap water or pre-chilled water (cold liquor) which is better. The cooling water exiting the chiller can recovered into a Hot Liquor Tank or used for washing etc.
If using tap water, wort can be cooled to typically around 2-3 C above the tap water temperature. If using cold liquor (eg 4c), wort can be cooled to typical lager pitching temperatures. (eg 10 Celcius).
It has 1.25″ BSP connections for water and wort. If using the recommended tri-clover fittings in your brewery, we can supply matched tri-clover adaptors which screw on to the chiller.
Special HX features are:
- Cool up to 230 Litres of wort in 15 minutes
- Chiller feet supplied to enable chiller to stand upright
- Use ~230 Litres of cold liquor to cool 230L of wort (ie 1:1)
- Connections: All connections on the chiller are 1.25″ BSPP
- Fully cleanable in place (CIP)
- Can be fully dismantled for periodic inspection and maintenance
- All parts including replacement gasket and seals available
- 736mm H X 200mm W