600L Pro Jacketed Unitank – Dimple Jacketed – Australian Certified Pressure Tank AS1210
Available by application is any sized Austrailan Certified Unitanks.
Please Note: This fermenter comes with Dump valve, racking port valve and racking arm, spray ball and tank level valve and tubing. The Unitank also comes with blow off arm and valve.
Spunding valve, tasting valve and carbonation stone sold seperatley.
Designed to AS1210 Australian standards
Pressure vessel designed so you can ferment and Carbonate and dispense from the one vessel.
What you get:
- 600 Litre working capacity dual zoned jacked Conical fermenter available with top or side manway.
-
Wort Fermentation or maturation Tank Capacity: 600L (+25% Headspace minimum)
-
100% TIG welding with pure argon gas shield
-
Interior Finish: Sanitary 2B finish, Pickled and Passivated; (8K Mirror finish optional) Exterior Finish: Oil brushed finish（2B, 8K Mirror finish optional) Interior full polished to 0.2~0.4 μm without dead corner
-
Dish head and 60 degree cone bottom
-
Interior full polished to 0.2~0.4 μm without dead corner Insulated with high density Polyurethane foam; TH=80mm
-
Glycol Jacket: Dimpled plate on cone and side
-
Stringent tank leakage test by water and pressured gas Stringent Jacket leakage test by water and pressured gas
-
Sanitary top mounted manway with pressured door
-
CIP arm with 360° coverage CIP spraying ball
-
Mechanical relief valve 2 bar on CIP arm
-
Hydraulic shock pressure gauge on CIP arm
-
Rotating racking arm and port on cone with butterfly valve
-
Tri clamp discharge arm with butterfly valve
-
Thermowell for high accuracy temperature sensor
-
3pcs completely SUS304 heavy duty legs with leveling pad and legs support
-
Sanitary level tube and valves TC
