NANO – X 250L Jacketed Distilling/Wort Boiler: NEW ARRIVAL LATE JUNE 2024 – The Ultimate Boiler for any application
Introducing the new NANO-X Jacketed Distilling/Wort Boiler Range. Jacketed Boilers will come in 50L, 100L, 150L, 200L and 250L sizes to cater to the home and light commercial distilling market and the Beer and Cider Market. This type of boiler is also ideal for a number of other beverage market producers and food producers.
To align with the new range CPB is also launching NEW 8″ and 6″ Still designs to suit 150L, 200L and 250L Jacketed Boilers. Current 2″ and 4″ stills already exist for the 50L and 100L boiler sizes. Through NANO – X Cheeky Peak will be offering only the best for our customers who have had enough of the consumable products currently plaguing the market.
250L Boiler Dimentions:
- 70mm Diameter with inner jacket 60mm Diameter
- 1255mm Height from the base of the legs to the top of the 10″ Tri ClamplTri Clover ferrule (does not include leveling feet or wheel height)
250L NANO-X Jacketed Distilling Boiler – Inner Jacket
1.5mm Thick 304SS Stainless Steel
1 X 10″ Top Tri Clamp/Tri Clover Mounting Port
1 X 3.5″ Tri Clamp/Tri Clover Forward Viewing Port located to the front of the 10″ port allowing view of boiler contents during a boil
3 X 1.5″ Tri Clamp/Tri Clover port on top of the boiler for a host of other accessories available at Cheeky Peak Brewery
1 X 1.5″ Tri Clamp/Tri Clover Middle thermometer port located 450mm from the base of the boiler and designed to allow for a digital temperature controller sensor or probe or an analogue thermometer
1 X 1.5″ Tri Clamp/Tri Clover Dump port which draws from the middle of the Inner Jacket Dished Bottom. The dump port is fabricated with an elbow and then pipe work that runs through to the outer jacket to the front of the boiler. This design allows complete liquid dump and ensures no residue remains thus enabling dry storage
250L NANO-X Jacketed Distilling Boiler – Outer Jacket
2 X 2″ Tri Clamp/Tri Clover ferrules for ports to enable 2 X Elements to be mounted at the base of the boiler. The elements go into the water surrounding the inner jacket, meaning, Elements never come into contact with contense in the boiler. This is the ultimate boiler for any boiling application
2 X 1.5″ Tri Clamp/Tri Clover ferrules, located on the body of the boiler. These ports allow for sight glasses to be installed to ensure water level is above elements. The top 1.5″ port also allows for jacket pressure relief which is vital when boiling water within a jacketed boiler. (Pressure relief is a must for this type of boiler and not a negotiable)
1 X 1.5″ Tri Clamp/Tri Clover ferrule at the base of the boiler to allow for complete draining of water from the jacket
4 X 304SS Legs and Leveling feet supplied with the boiler.
Valves and Accessories:
CPB has choosen not to supply any fitting for our new boilers because a number of customers already own fittings which can be used. No need to add extra cost for items you may already have. If you need advice on what to include in terms of fittings and valves please feel free to email us at info@cheekypeakbrewery.com.au
