NANO QuickSeal 304SS 1/2″ 3 Piece Sight Glass Ball Valve No2

We have changed the bulkhead fitting slightly to remove the 1/2″ SS 30mm Internal threaded tube and replaced it with a Hex Nut.  We have done this for those with single vessel systems where the other fitting might clash with the malt pipe.

Now you can see if your hops have dropped out of your wort when transfering to your fermenter.  You can also watch your wort clear as you recirculat your mash and you can see if any grains are going through to your pump as you recirculate.

IMPORTANT: We have fitted the sight glass to the front of the valve but it can also be fitting to the rear of the valve if this is what you prefer.

This sight glass valve suits any NANO Vessel and can be fitted to any other vessel where a 22mm hole is made to suit the bulkhead end. 

IMPORTANT: We send you the QuickSeal Valve set and the sight glass upgrade kit seperate for you as the customer to install.  We do this so you have parts for a quick seal valve and all parts for the sight glass kit to turn the valve into a sight glass valve.  If you are not confident installing the glass we can do it for you, simply let us know in the comments at checkout. Also please let us know if you want the glass installed in the front, like in the image above, or at the rear of the valve.

WATCH VIDEO ASSEMBLY INSTRUCTIONS